溶胶-凝胶新方法合成介孔铁酸铜纳米粉体催化剂上CO低温氧化(英文)

Mesoporous CuFe2O4 solid solution nanopowders with high specific surface areas were synthesized by a novel, very simple and inexpensive sol-gel route using propylene oxide as gelation agent, and used as the catalyst in low temperature CO oxidation. The samples were characterized by X-ray diffraction, N2 adsorption-desorption, thermogravimetric/differential thermal analysis, Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, and temperature-programmed reduction. The results revealed that the samples have a nanocrystalline structure with crystals in the range of 10 to 25 nm, and that all the catalysts have mesoporous pores. The addition of Cu into iron oxide affected its structural and catalytic properties. The sample containing 15 mol% Cu showed the highest specific surface area and catalytic activity, and showed high catalytic stability in low temperature CO oxidation.     

In Silico and Experimental Characterization of Chimeric Bacillus thermocatenulatus Lipase with the Complete Conserved Pentapeptide of Candida rugosa Lipase

Lipases are one of the highest value commercial enzymes as they have broad applications in detergent, food, pharmaceutical, and dairy industries. To provide chimeric Bacillus thermocatenulatus lipase (BTL2), the completely conserved pentapeptide (¹¹²Ala-His-Ser-Gln-Gly¹¹⁶) was replaced with similar sequences (²⁰⁷Gly-Glu-Ser-Ala-Gly²¹¹) of Candida rugosa lipase (CLR) at the nucleophilic elbow region. For this purpose, three mutations including A112G, H113E, and Q115A were inserted in the conserved pentapeptide sequence of btl2 gene. Based on the crystal structures of 2W22, the best structure of opened form of the chimeric lipases were garnered using the MODELLER v9.10 software. The native and chimeric lipases were docked to a set of ligands, and a trial version of Molegro Virtual Docker (MVD) software was used to obtain the energy values. Docking results confirmed chimeric lipase to be better than the native lipase. Following the in silico study, cloning experiments were conducted and expression of native and chimeric btl2 gene in Pichia pastoris was performed. The native and chimeric lipases were purified, and the effect of these mutations on characteristics of chimeric lipase studied and then compared with those of native lipase. Chimeric lipase exhibited 1.6-fold higher activity than the native lipase at 55 °C. The highest percentage of both lipases activity was observed at 60 °C and pH of 8.0. The ion Ca²⁺ slightly inhibited the activity of both lipases, whereas the organic solvent enhanced the lipase stability of chimeric lipase as compared with the native lipase. According to the results, the presence of two glycine residues at the conserved pentapeptide region of this chimeric lipase (¹¹² Gly-Glu-Ser-Ala-Gly ¹¹⁶) may increase the flexibility of the nucleophilic elbow region and affect the enzyme activity level.     

Chemically bonded multiwalled carbon nanotubes as efficient material for solid phase extraction of some metal ions in food samples

Multiwalled carbon nanotubes chemically functionalized with 2-((3-silylpropylimino) methyl) phenol (SPIMP-MWCNT) and successfully applied for the solid phase extraction (SPE) of some metal ions in food samples. The influences of the analytical parameters including pH, amounts of solid phase, eluent conditions (type, volume and concentrations), sample volume and interference of some metal ions on the recoveries of ions Cu²⁺, Pb²⁺, Fe²⁺, Ni²⁺ and Zn²⁺ ion were investigated. The metal ions retained on SPIMP-MWCNT was eluted using 6?mL of 4?mol?L^?1 HNO₃ solution and their content was determined by flame atomic absorption spectrometry (FAAS) with recoveries more than 95% and relative standard deviations (n?=?5) between 2.4–3.4% for both reproducibility and repeatability. The detection limit of this metal ions was between 1.0–2.6?ng?mL^?1 (3S _b , n?=?10) and their preconcentration factor was 100, while their loading capacity was above 32.9?mg?g^?1 of SPIMP-MWCNT. The proposed method was successfully applied for the preconcentration and determination of analytes in different samples.     

氨三乙酸、缬氨酸、亮氨酸的三元过渡金属配合物：合成和生物学应用

以氨三乙酸HNTA2-为主要配体,缬氨酸(valine)或亮氨酸(leucine)为次要配体在微酸性介质中合成了Ni(Ⅱ),Cu(Ⅱ),and Zn(Ⅱ)的三元配合物。用元素分析、热分析、FTIR,UV-Vis分光光度法,磁性测量和质谱法表征了合成的三元配合物。结果表明,三元配合物可在金属(M):氨三乙酸(HNTA)∶缬氨酸(valine)或亮氨酸(leucine)=1∶1∶1时制得,其分子结构为[M(HNTA)(valine)(H2O)2].1.5H2O and[M(HNTA)(leucine)(H2O)2].1.5H2O(其中M=Ni(Ⅱ)or Cu(Ⅱ))和H2[Zn(NTA)(valine)(H2O)]H2O。标题三元过渡金属配合物为八面体对称构型。同时研究了该三元配合物对大肠杆菌,金黄色葡萄球菌,白色念珠菌,黄曲霉菌(菌株从开罗大学理学院微分析中心获得)的抗菌活性。根据推荐的知名方法用标准的抗菌和抗真菌剂进行体外测试(in vitro)以评估我们的新制备的配合物对细菌和真菌物种的生长抑制活性。     

Developing Thermodynamic Micellization Approach to Model Asphaltene Precipitation Behavior

An little known yet significant issue in petroleum production processes in petroleum reservoirs is asphaltene precipitation/deposition. Asphaltene has not only a fuzzy and vague nature but it also can cause detrimental problems like reservoir blockage and, as a result, low oil recovery. To tackle this issue, many researchers have attempted to monitor asphaltene behavior versus thermodynamic conditions. A thermodynamic micellization approach is implemented in this work to describe asphaltene precipitation behavior for two sample fluids from Iranian reservoirs. First, the basic structures of the addressed approach and different contributions to Gibbs free energy of micellization proposed by Victorov and Firoozabadi (VF) are demonstrated. Second, a detailed sensitivity analysis with respect to the model parameters is performed by utilizing a new calculation strategy. Finally, a comparison between the predicted precipitation curve and the experimental one is illustrated; moreover, comparing our results with those reported by Victorov proves the superiority of the new strategy over the conventional one. The significance of this study shows the effect of each micellization parameter on the asphaltene precipitation behavior curve and illustrates the ability of the micellization approach evolved by VF in monitoring the effect of pressure on asphaltene precipitation using the new calculation procedure. Outcomes from this study could couple with commercial reservoir simulation software to improve precision and integrity for designing robust and effective production units.     

Novel modified carbon nanotubes as a selective sorbent for preconcentration and determination of trace copper ions in fruit samples

In this work, multiwalled carbon nanotubes were reacted with N‐[3‐(triet‐hoxysilyl)propyl]isonicotinamide to prepare pyridine‐functionalized carbon nanotubes. This novel sorbent was characterized by infrared spectroscopy, thermal and elemental analysis, and scanning electron microscopy. Functionalized carbon nanotubes were applied for the preconcentration and determination of copper ions using flame atomic absorption spectrometry. Various parameters such as sample pH, flow rate, eluent type and concentration, and its volume were optimized. Under optimal experimental conditions, the limit of detection, the relative standard deviation, and the recovery of the method were 0.65 ng/mL, 3.2% and 99.4%, respectively. After validating the method using standard reference materials, the new sorbent was applied for the extraction and determination of trace copper(II) ions in fruit samples.     

Application of a cohesive zone element for the prediction of damage in nano/micro coating

Many tools in production technology are nowadays coated to obtain a satisfactory lifetime and degradation resistance. Therefore, the main goal of this study is to investigate antiadhesive and wear resistant coatings made of ceramics, plastics and metals produced by High Power Pulsed Magnetron Sputtering (HPPMS) technique [1]. A cohesive zone element technique (CZ) is applied to model the interactions of the coatings and the substrate surfaces (see [2]). This goes along with the investigations of the delamination and failure behavior of the involved surfaces. To illustrate the applicability of the model, several structural simulations are performed. The developed CZ element model is capable of modeling the separation, the contact and also the irreversible reloading conditions in both normal and tangential directions [3]. The model is further developed to be applicable for different structures including different bonding behaviors, with a higher stability. The talk concludes with a detailed discussion of the numerical results of different material and interface properties. (© 2015 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Electrochemical hydrogen storage in porous carbons with acidic electrolytes: Uncovering the potential

Electrochemical hydrogen storage in porous carbon materials is emerging as a cost-effective hydrogen storage and transport technology with competitive power and energy densities. The merits of electrochemical hydrogen storage using porous conductive carbon-based electrodes are reviewed. The employment of acidic electrolytes in such storage systems is compared with alkaline electrolytes. The recent innovations of a proton battery for smaller-scale electricity storage, and a proton flow reactor system for larger (grid)-scale storage and bulk export of hydrogen produced from renewable energy, are briefly described. It is argued that such systems, along with variants proposed by others, all of which rely on electrochemical hydrogen storage in porous carbons, can contribute to the search for energy storage technologies essential for the transition to a zero-emission global economy.     

Applications of intelligent methods in various types of heat exchangers: a review

Journal of Thermal Analysis and Calorimetry - Heat exchangers are applicable in different industries and technologies, and their performance is influenced by different parameters. In addition to...     

Kinetic Behavior of Quaternary Ammonium Hydroxides in Mixed Methane and Carbon Dioxide Hydrates

This study evaluates the kinetic hydrate inhibition (KHI) performance of four quaternary ammonium hydroxides (QAH) on mixed CH₄ + CO₂ hydrate systems. The studied QAHs are; tetraethylammonium hydroxide (TEAOH), tetrabutylammonium hydroxide (TBAOH), tetramethylammonium hydroxide (TMAOH), and tetrapropylammonium hydroxide (TPrAOH). The test was performed in a high-pressure hydrate reactor at temperatures of 274.0 K and 277.0 K, and a concentration of 1 wt.% using the isochoric cooling method. The kinetics results suggest that all the QAHs potentially delayed mixed CH₄ + CO₂ hydrates formation due to their steric hindrance abilities. The presence of QAHs reduced hydrate formation risk than the conventional hydrate inhibitor, PVP, at higher subcooling conditions. The findings indicate that increasing QAHs alkyl chain lengths increase their kinetic hydrate inhibition efficacies due to better surface adsorption abilities. QAHs with longer chain lengths have lesser amounts of solute particles to prevent hydrate formation. The outcomes of this study contribute significantly to current efforts to control gas hydrate formation in offshore petroleum pipelines.